Increase your decompression options with the advanced, gas-switching Suunto Vytec DS.
This gas-switching, multi-mode, decompression dive computer with deep stop algorithm and optional wireless tank pressure transmitter will take your diving to the next level.
Please Note: Transmitter is not included and is available as an optional extra.
Features
- Air, Nitrox and Gauge modes
- Gas switching (3 mixes 21-99%)
- Complete decompression stop data
- Multi-step ascent rate indicator
- Optional wireless pressure transmission
- Extensive memory functions
- Built-in dive simulator
- Adjustable Suunto RGBM model
- Audible alarms (including maximum depth alarm)
- User-replaceable battery
- Optional PC-interface
Specification
The Suunto Vytec DS enables the diver to switch gases during the dive. When in Nitrox mode, the user can preset up to three different gas mixes containing 21-99% oxygen. Preferred gas mixes can be stored as default (e.g. EAN32), and be set ON or OFF for each dive, or modified as needed. The Suunto Vytec DS provides easy and reliable gas switching between enabled gases during the dive.
The Suunto Vytec DS is available with an optional wireless pressure transmitter that can easily be attached to the high-pressure port. There are two low air warnings; one is factory-set at 50 bar and the other is user changeable between 10 - 200 bar.
The wireless operation can easily be enabled or disabled in the Suunto Vytec DS's settings. With the wireless transmission enabled, the Suunto Vytec DS displays tank pressure and calculates remaining air time based on current gas consumption. The wireless transmission can be used in Air, Nitrox, and Gauge modes. The pressure transmitter is 300 bar (4000 psi) compatible, and has a user-replaceable battery.
When using Suunto Vytec DS in Gauge mode, the diver is provided with an accurate depth and dive timer. A dive timer with reset function also displays the dive time in minutes and seconds, a feature extremely useful for timing accurate bottom times and decompression stops.